Skip to main content

LunaH-Map mission rolls on to next steps

As ASU’s first NASA mission begins Year 3, there are no blueprints for building the first spacecraft of its kind

A student wheels a full-scale LunaH-Map model through a hallway
September 26, 2017

It’s a spacecraft the size of a shoebox, and, if all goes well, it will launch on a voyage to the moon in about two years.

NASA greenlit the LunaH-Map mission two years ago. It’s the first NASA missionASU has instruments or roles on 11 NASA missions in flight, and a science team member on a 12th mission in flight. The university has seven more instruments in development for scheduled launches, and five missions (including LunaH-Map) in development. for Arizona State University’s School of Earth and Space Exploration. It’s going to look for ice on the moon, which can be used for water or fuel in the push to Mars.

It’s a lot of firsts. First deep-space cubesat mission. First test case for sending lots of little spacecraft tagging along on a big mission. First time NASA — a famously risk-averse organization — has said, “Go low cost and high risk.” And it’s the first interplanetary spacecraft built on ASU’s campus — one of only seven institutions in the U.S. where that is possible.

This past summer, LunaH-Map passed a huge milestone: a critical design review from NASA, an in-depth technical review to ensure a system can proceed into reality from plans and can meet stated performance requirements within cost, schedule and risk.

For principal investigator (PI) Craig Hardgrove and his team of engineers and scientists, proceeding into reality from plans is nerve-wracking beyond belief.

Hardgrove said people have told him, “If you’re not terrified every day, you’re not doing something genuinely new.” A NASA official told him it’s pretty much standard operating procedure for a first-time principal investigator to go through the meat grinder.

“I think as PI you can’t be an expert in everything, so it’s natural to be a bit freaked out by a lot of elements of the mission,” Hardgrove said. “To cope, I wind up asking a lot of questions. At some point you just have to trust the people working for you.”

In some ways, this mission is a return to the early days of the space program, where no one knew what would work and what wouldn’t.

“The people who work on this believe in it,” he said. “They believe it’s something that should happen. They believe there will be more of these tiny spacecraft in the future and that this is a new model of exploration for NASA.”

It’s an exercise in budget and risk.

How cheaply, both in terms of material and manpower, can you gather information from space?

“The whole thing is about risk,” Hardgrove said. “That’s what it feels like at this point. We’re in a good spot, but it feels like that’s really the exercise.”

Video by Ken Fagan/ASU Now

Fighting for space

There is no space on the spacecraft. Cubesats are miniature satellites (in this case a spacecraft) built to a standardized size and volume. One unit is about the size of a large Rubik’s cube. LunaH-Map will be the size of six of those put together — a 6u, in space-systems terminology.

LunaH-Map is the Rubik’s Cube from hell. Arguments have broken out about millimeters. “Can we get a millimeter there?” “NO!”

People also have to get their hands in it to assemble it. All the components on the 3-D-printed model fit together. But they have to be wired together too. And wires take up room.

Savannah Puckett is a software and hardware test engineer with AZ Space Technologies, a company specializing in design and manufacture of instrument and spacecraft avionics and software, which is contracted to help build LunaH-Map. She is also an ASU computer science grad.

“There’s a lot of things we have to work through as a team that a lot of other teams don’t have to deal with,” Puckett explained. “So bigger satellites, there’s more space to do things. Here, we don’t have a lot of space for wiring. Our structure is pretty compact. … We all have to work through how we’re going to fit these somewhat larger wires into this tiny little cereal box, basically.”

There are roughly 200 wires in the harness. They have to fit into a few centimeters on top of all the hardware. Bear in mind this is not like cramming speaker wire and HDMI cables behind your stereo receiver so they’re out of sight.

“We can’t let anything drop down,” Puckett said. “We have to make sure it’s all flat and secure, nothing’s going to rattle around when we send it out. So there’s not a lot of space to make sure the wires stay there, and there’s not a ton of space to make sure all of our wires are exactly where they need to be.”

Puckett’s job makes building a Swiss watch look simple. All of the components need to work, and none of them can interfere with one another.

“I think working on a watch would be a little bit easier,” she said.

Never done before

After launching, the rocket will drop off the cubesat about halfway to the moon. It will take LunaH-Map 70 days to reach the moon, using momentum from the rocket while making minor course corrections.

It will then begin a very slow descent to its final orbit around the moon. It will fly about 10 kilometers above the surface — unusually low for a spacecraft — and it will take 470 days to reach that altitude. It’s not the Millennium Falcon. The propulsion system provides about a quarter- to a half-ounce of thrust. That’s as much force as dropping a sheet of paper on your hand.

“We’re doing something that’s never been done before,” said Nathaniel Struebel, a senior majoring in aeronautical aerospace engineering, and thermal and structural engineer on the mission. “If we’re successful, it’ll open the door for a lot more.”

Aerospace engineer Joe DuBois is the structure design lead and integration and test lead on the team. One of the keys to making this mission a success from an engineering standpoint is cutting as much as possible from the vehicle. They ditched the idea of putting a camera on it a long time ago. It took up too much space and wasn’t absolutely essential.

Usually functions like command, data handling and guidance and navigation control are huge on spacecraft so they can include as many instruments as possible. Not on this one, DuBois said.

“Our spacecraft goes in a different direction by developing a very small spacecraft around a single instrument,” DuBois said. “There can be an increase in (mission) robustness by sending multiple, single-sensor spacecraft rather than a single, multi-sensor spacecraft.”

Weight is a factor everyone is keeping an eye on. The limit is 14 kilograms, just under 31 pounds. Southwest Airlines allows you more weight than that. Each component has to come in within its mass budget.

“We are relying on the great work done by our component suppliers to be able to accomplish the challenging requirements,” DuBois said.

Suppliers are treading new ground too. For example, a company called Radiation Monitoring Devices is making the neutron detector that will sniff for ice. The company makes devices like dirty-bomb detection equipment for the military, but it has never made a detector that has to a) fit in a really tiny space and b) fly in deep space. That’s pretty much the mantra for all the suppliers: We’ve never made one this small! We’ve never made one to go into space!

Another issue is a mission operations system that works with NASA’s Deep Space Network, three communications facilities around the world that act something like air-traffic control for everything American in space.

“Traditionally these systems are for hundreds of millions of dollars spacecraft,” DuBois said.

‘Relentless cat herding’

Teri Crain is project manager. A scientist’s daughter, she has spent her whole life around huge science projects of one kind or another. This is her first NASA mission, however.

She works directly with Hardgrove, team members and mission subcontractors to plan and schedule the project requirements to meet NASA’s expectations, all the while staying on budget.

“Unofficially, I do whatever it takes to appease the masses — from relentless cat herding for meetings and planning of our critical NASA reviews to furnishing and maintaining our lab space and clean room as we prepare to build, test and deliver our cubesat to Tyvak,” Crain said.

Tyvak builds custom satellites, contracts launches and provides launch integration services. The latter means they load stuff on to rockets and make sure it works.

NASA intends the 2019 launch to be the maiden voyage of its new Space Launch System, a beast of a rocket envisioned as the Mars workhorse. The SLS is experiencing rocky times, according to industry buzz.

“With each EM-1 SLS delay, we need to account for the costs of keeping the project and our resources afloat,” Crain said. “As you can imagine, that’s no easy task.”

Next step: Parts on a table

Integration and Test is where you come down from the stratosphere and start thinking about how everything is actually going to work.

“It’s a bit terrifying,” Hardgrove said. “It’s also where we need to be. ... We’re trying to build a mission with less people than you have on a typical NASA instrument team.”

Integration and testing training is coming up. What are clean-room procedures? What software and hardware will they need to assemble the spacecraft? What materials will they need? What tests will they do? There’s no blueprint for any of this, and it’s not like you can run down to Ace Hardware for something you suddenly need.

“It’s not just, ‘Get the parts and put it together,’” Struebel said. “We can’t risk damaging what we get.”

For instance: how to get hands inside the tiny spacecraft to assemble it. Puckett has cooked up a test plan for that problem.

“We’re going to have to open up the front and a side panel as well to make sure we actually have enough room to move things around,” she said. “It’s going to be difficult. None of us have hands that small.”

RJ Amzler’s job will come into play at that point. He is the Flat Sat systems engineer.

Flat Sat is a bunch of boxes laid out on a table that mimic the spacecraft and allow the team to understand how it’s functioning and whether the flight hardware they receive is acting properly. The boxes-on-a-table example is literal. When the flight hardware begins trickling in during November, the team will lay it all out on a table, connect it and run programs that check to see if it’s all working properly.

“Any spacecraft is going to have problems with interfaces, but the work of Savannah got rid of a lot of those problems,” Amzler said.

Flying colors

“NASA told us after the (critical design review), ‘You know we didn’t expect any of this from you,’” Hardgrove said. “They didn’t expect us to have the level of detail we’re putting into this. They were impressed: ‘You guys are really going above and beyond what we thought this program could be.’ That’s great to hear. I think they really view the program differently after our CDR.”

NASA is paying very close attention to this mission. It’s the test case for the future: “Let’s pack in 10 little shoeboxes and see what they can do.”

“That’s totally possible, and I think that’s something they’re looking for new missions like ours on every launch in the future,” Hardgrove said.

“ASU is leading the way in small interplanetary science,” DuBois said.

Top photo: Aeronautical and aerospace engineering senior Nathaniel Struebel wheels the full-scale LunaH-Map model to the sixth-floor Hardgrove Lab in ISTB4 on Sept. 22. The 3-D-printed model is showing the challenges the scientists will have in manufacturing the lunar-mapping CubeSat that is planned to launch in December 2019. Photo by Charlie Leight/ASU Now

More Science and technology


Two teenagers hug and smile at each other.

ASU study: Support from romantic partners protects against negative relationship stress in teens

Adolescents regularly deal with high levels of stress, which can increase the risk of substance use and experiencing mental health challenges such as anxiety or depression. Stress can also affect…

A large bluish-white planet in space.

ASU scientists help resolve 'missing methane' problem of giant exoplanet

In the quest to understand the enigmatic nature of a warm gas-giant exoplanet, Arizona State University researchers have played a pivotal role in uncovering its secrets. WASP-107b has puzzled…

Digital rendering of cells.

Study finds widespread ‘cell cannibalism,’ related phenomena across tree of life

In a new review paper, Carlo Maley and Arizona State University colleagues describe cell-in-cell phenomena in which one cell engulfs and sometimes consumes another. The study shows that cases of this…