Things are shaping up for AZLoop team
ASU-led team to begin testing propulsion and braking systems the first week of July as SpaceX competition approaches
The lazy days of summer are anything but for the AZLoop team.
With the Aug. 27 SpaceX competition fast approaching, the team has been busy building propulsion and braking systems, as well as the form needed to mold the pod that will run during the August event.
The goal: creating a working prototype of a new form of proposed mass transit called “Hyperloop” that promises to hit speeds of up to 750 mph.
The team — led by Arizona State University but made up of students from throughout Arizona in a range of majors — is on track to complete the project on time. A 50-foot test track has been built at the ASU Polytechnic campus; they’ll begin testing magnetic propulsion and braking systems the first week of July. Construction of a 150-foot track will begin in early July, with a completion date of around Aug. 1.
Video by Ken Fagan/ASU Now
According to Josh Kosar, co-lead on the project and a new ASU graduate, they started out with a well-defined organizational structure but over time have had to make lots of changes to adapt to individual work styles and skill sets. New leaders emerged, adjustments were made and now the process is working out well.
“The most important thing I have learned so far as manufacturing lead is to manage a team,” said ASU mechanical engineering junior Himanshu Dave. “… Knowing their strengths and weaknesses as well as your own and understanding that has been one of the best skills I have learned.”
A precision-cut scale model of the pod is being produced in layers that will be attached to each other to shape the final pod design. The team will cover it with Bondo to fill in around the rough edges of the wood layers before it is sanded and primed.
“It’s all experimentation, lifting up the shape of it, changing it a little bit,” Dave said.
Magnetic braking systems are in the works, as well as propulsion systems. They will be attached to a sled filling in as the pod to test forward motion and braking systems on the 50-foot track.
“They’ve got what it takes. They are careful and rational,” said ASU Professor John Robertson, lead faculty adviser. “It’s like in any race — you want to blow through the finish line, you don’t want to fall over the finish line. You’ve got to blow through it, and I think that is what they are going to do.”
-
Breaking team member Marcos Valenzuela watches Shawn Ralson drill a hole in one of the magnetic braking arrays June 29. The team is nearly finished machining the braking modules that they'll soon test on the prototype and test track. After the modules pass the tests, they'll be attached to the base of the vehicle the AZLoop team will take to the August SpaceX Hyperloop competition.
Photo by Charlie Leight/ASU Now
-
A schematic shows what the interior of the pod would look like.
Photo by Charlie Leight/ASU Now
-
Project co-lead Josh Kosar (left) and manufacturing team lead Himanshu Dave stack recently cut layers of compressed wood to form the full-size pod in their studio on the Polytechnic campu June 27. The team will cover the forms with Bondo, primer and a release agent before wrapping it in the carbon fiber shell that will be the exterior of the vehicle the team will take to competition.
Photo by Charlie Leight/ASU Now
-
Braking systems lead Jimmy Casey attaches the motor assembly on a brake module on June 20. The team will soon test the brakes on the prototype and test track. After the modules pass the tests, they'll be attached to the base of the vehicle the team will take to California.
Photo by Charlie Leight/ASU Now
-
Levitation team lead Megan Moore, a physics senior, watches the milling of one of the levitation housing array modules on June 20.
Photo by Charlie Leight/ASU Now
-
Mechanical team member Himanshu Dave on June 20 watches a computerized ShopBot cut sheets of compressed wood into layers that will become the shape of the 14-foot-long competition pod. The group cut more than 25 layers that week that they would then sand and treat so they can cover it with carbon fiber to make the high-speed vehicle shell that they’ll take to the August SpaceX competition.
Photo by Charlie Leight/ASU Now
-
Gokul Chandasekaran (left) and Gautham Ayyapessur (right) watch as Prerak Dongaonkar carefully chips away the foam form from the carbon fiber prototype shell in the AZLoop team workshop on June 13. After the team tested the quarter-scale prototype of the pod, it turned its attention to the 14-foot-long version that will go to the SpaceX competition.
Photo by Charlie Leight/ASU Now
-
Mechanical engineering senior and mechanical team lead Anthony Spadafore adds another shim to level the 50-foot outdoor test track outside the AZLoop team workshop on the Polytechnic campus on June 13. Construction of a 150-foot track will begin in early July, with a completion date of around Aug. 1.
Photo by Charlie Leight/ASU Now
-
On June 13, Anthony Spadafore and project co-lead Lynne Nethken look over the nearly completed 50-foot outdoor test track on the Polytechnic campus. Although the team is made up of students from multiple schools, including Embry-Riddle Aeronautical University and Northern Arizona University, it is led by ASU students and ASU dedicated lab space and funding to purchase prototype materials.
Photo by Charlie Leight/ASU Now
-
Mechanical engineering systems senior Marcos Valenzuela attaches polymer wheels to the base plate at the AZLoop team workshop on June 13.
Photo by Charlie Leight/ASU Now
-
Two generations of Hyperloop mock-ups sit on a cabinet in the AZLoop studio in the Simulator Building on the Polytechnic campus.
Photo by Charlie Leight/ASU Now
-
Stability team members Ayan Rafique (left) and Rohit Kumar Ladda on June 9 contemplate fixing a flywheel that was not cut accurately. Rafique is a senior in physics and electrical engineering. Ladda is a second-year grad student in mechanical engineering. They decided instead of ordering more aluminum and making a new one, they would have the manufacturing trainer, Rhett Sweeny, re-cut it.
Photo by Charlie Leight/ASU Now
Top photo: ASU mechanical engineering junior Himanshu Dave (left) gets some guidance from Chandler Gilbert Community College student Ernest Poteat on how to treat the layered model for the vehicle's carbon fiber shell on ASU's Polytechnic campus on Thursday, June 29. The mechanical team will cover the model with Bondo Body Filler, sand it smooth, paint on primer then a release agent and follow that with the carbon fiber strips. When completed in about six weeks, it will be attached to the vehicle the AZLoop team will take to the August SpaceX Hyperloop Pod Competition in California. Photo by Charlie Leight/ASU Now
More Science and technology
Associate professor shares her journey from NASA to ASU
From leading space missions to designing and building spaceflight hardware and training students in space science and engineering, Arizona State University is proving that space is more than a…
Famed systems engineer inspires ASU to tackle global problems
“Providing great talent with great opportunity can make a great difference.” Such was a key part of the message delivered by G. Don Taylor, executive vice provost and the Charles O. Gordon Professor…
The science behind chronic stress
Stress comes in many shapes and sizes. There’s the everyday stress of preparing for a final exam or being stuck in traffic. And the more significant stress of losing a friend, family member,…